Glass-Fused-To-Steel Industrial Tanks For Fire Protection Water
Storage
Zhengzhong Technology is China's largest manufacturer of
Glass-Fused-to-Steel tanks. Zhengzhong Technology has more than 30
years of experience in the water storage industry and is considered
to be the leading manufacturer of GFS bolted storage tanks.
GFS storage tanks are considered to have advantages over other
storage tank applications. Genzon Technology can provide and
install storage tanks for customers. For projects with storage
requirements of more than 20 cubic meters, it is recommended to use
this storage tank. These storage tanks can be used in industrial
applications (including mines) and can be used to store materials
such as waste water, sewage, sewage, drinking water, fire fighting
water, and desalinated water.
Quality assurance
Quality assurance and durability. This concept is reflected in the
quality of the enamel assembly tank, which exceeds the requirements
of international enamel standards. According to the structural
requirements of AWWA D103-09 Structural Design Behavior Standard,
the working life of Zhengzhong Technology's FRP bolt storage tank
is 30 years.
Advantages of Glass-Fused-To-Steel Industrial Tanks
long life
Lower cost of capital
Low maintenance cost
Fast installation time
Economic global shipments
Optimal corrosion resistance
The on-site installation of glass fused to steel storage tanks
includes a unique jacking system. Once the starter plate (bottom
ring) is embedded in the concrete foundation or designed and built
with glass-coated bolted steel floor, the top ring of the tank is
built on the jack. Then the top of the water tank was erected, and
the lifting ring and the top were jacked up. For each additional
ring, then assemble the bolt pieces below the top ring together,
and apply a specially made polyurethane sealant between the seams.
All construction works are completed on the ground to ensure a
safe, fast and efficient construction environment. The storage tank
is usually completed within one to two weeks. If the general salary
of on-site labor is used, it can save a lot of cost for the owner.
GFS Tanks Specifications
| Coating color | dark blue, dark green, white, and customized |
| A standard steel plate size | effective size 2400mm x 1200 m |
| Steel plates thickness | 3mm - 12mm, depends on the diameter & height |
| Coating thickness | 0.25mm - 0.4mm, two coatings internal and external |
| Acid and alkalinity proof | standard coating suits for PH3 - PH11, special coating suits for
PH1 - PH14 |
| Adhesion | 3,450N/cm |
| Elastic | same as steel sheet, around 500KN/mm |
| Hardness | 6.0 Mohs |
| Service life | >30 years |
| Spark test | >1500 V |
| Permeability | gas and liquid impermeable |
| Easy yo clean | smooth, glossy, inert, anti-adhesion |
| Corrosion resistance | excellent! Suitable for wastewater salt water, seawater, high
sulfur crude oil, salt fox, organic and inorganic compounds
|
About Center Enamel Co., Ltd
Center Enamel Co., Ltd is not only the first Glass-Fused-to-Steel
Tanks manufacturer and supplier in China, but also the most experienced
Glass-Fused-to-Steel tanks manufacturer in all of Asia. Center
Enamel Glass-Fused-to-Steel tanks engineering & design, product
testing and quality system are in strict accordance with AWWA
D103-09, OSHA, ISO/EN 28765, NSF61 and NFPA etc. international
standards. CEC Glass-Fused-to-Steel tanks are widely used in
drinking/potable water, industrial effluents, municipal sewage,
bio-energy, landfill leachate, agriculture etc. applications. Until
2018, Center Enamel Glass-Fused-to-Steel tanks have been exported
to more than 60 countries including USA, Australia, Canada,
Malaysia, Indonesia, Russia, UAE, Panama, India and South Africa
etc.
